There is a new version of this product. Rode VideoMic Pro with Rycote Lyre Shockmount

 
The RDE VideoMic Pro raises the bar set by the original RODE VideoMic, by combining broadcast quality audio with an ultra compact and lightweight ergonomic design.
 
Incorporating new features specific to high end video, the VMP also evolves many of the features that have made the VideoMic so successful. Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.
 
   Broadcast recording quality condenser microphone
   Compact design (only 150mm/6" length)
   Ultra lightweight (only 85g/3oz)
   9V battery powered, with up to 70 hours battery life (alkaline)
   Integrated shock mounting
   Integrated foam windshield
   3.5mm stereo mini-jack output (dual mono)
   Two step High Pass Filter (flat, 80Hz)
   Three position level control (-10dB, 0, +20dB)
   Camera shoe mount with 3/8" thread for easy boompole mounting
 

Specifications

   Power : 9V alkaline battery (Current 7.8mA)
   Acoustic Principle : Line Gradient
   Directional Pattern : Super-Cardioid
   Frequency range : 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
   Output impedance : 200O
   Signal noise ratio : 74 dB SPL (A - weighted per IEC651)
   Equivalent noise : 20 dB SPL (A - weighted per IEC651)
   Maximum SPL : 134dB SPL (@ 1kHz, 1% THD into 1KO load)
   Maximum output voltage : +6.9dBu (@ 1% THD into 1kO)
   Sensitivity : -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
   Weight : 85g/3ozgm
   Dimensions : 95mm/3.74"mmH x 43mm/1.69"mmW x 150mm/6"mmD
 

10 Years Warranty

We are a RODE U.S. authorized dealer. All RODE microphone products bought from L.A. Color Pros will be honored by RODE for a 10-year limited warranty through RoddMic.com online registration.